Two-Part Epoxy Adhesives

  1. Home
  2. Products
  3. Two-Part Epoxy Adhesives

Loxeal Two Component Epoxy Adhesives are easy to use structural adhesives with high mechanical resistance. They cure by mixing the chemical components (resin and hardener), usually at room temperature

Key benefits

  • High mechanical resistance
  • Can bond different materials
  • Different curing times available
  • Heating shorten the curing process
  • Fill large gaps
  • Highly resistant against humidity and chemicals
  • Available in a full color range: from transparent for glass and design to black for carbon fiber
  • Relatively low cost
  • Manual and pneumatic dispenser available for easy application

Substrates

  • Metal
  • Composite
  • Glass
  • Ceramic
  • Wood
  • Stone
  • Plastic

31-10

Tough, 120 minutes
Technical Data Sheet
Tough, 120 minutes

Multipurpose, transparent structural adhesive.

Recommended for structural bonding of many materials: metals, ferrite, ceramic, marble, glass, concrete, wood and some plastics (polyester, ABS, rigid PVC). Not indicated for rubber, soft materials, polyethylene, polypropylene and PTFE.

Bondings are well resistant to water, gasoline and oils.

31-40

Tough, transparent, 15 minutes
Technical Data Sheet
Tough, transparent, 15 minutes

Multipurpose, transparent structural adhesive, fast setting time.

Recommended for structural bonding of many materials : metals, ferrite, ceramic, marble, glass, concrete, wood and some plastics (polyester, ABS, rigid PVC).

Not suitable for soft materials, polyethylene, polypropylene and PTFE.

Bondings are well resistant to water, gasoline and oils.

31-42

Tough, transparent, 5 minutes
Technical Data Sheet
Tough, transparent, 5 minutes

Multipurpose transparent structural adhesive, fast setting time.

Recommended for structural bonding of many materials : metals, ferrite, ceramic, marble, glass, concrete, wood and some plastics (polyester, ABS, rigid PVC).

Not suitable for rubber, soft materials, polyethylene, polypropylene and PTFE. Bondings are well resistant to water, gasoline and oils.

32-43

General purpose, fast curing even at low temperature
Technical Data Sheet
General purpose, fast curing even at low temperature

Multipurpose, thixotropic transparent and flexible structural adhesive, fast setting time.

It is designed to be non-sagging for ease of use on vertical surfaces.

Recommended for structural bonding of many materials: metals, ferrite, ceramic, marble, glass, concrete, wood and some plastics (polyester, ABS, rigid PVC).

Not suitable for soft materials, polyethylene, polypropylene and PTFE. resistance to water, gasoline and oils.

34-15

Tough and flexible, general purpose, impact resistant, 30 minutes
Technical Data Sheet
Tough and flexible, general purpose, impact resistant, 30 minutes

Highly flexible structural adhesive with improved peeling adhesion and shock resistance.

Recommended for bonding of many materials : metals, ferrite, ceramic, marble, glass, concrete, wood and some plastics (polyester, ABS, polycarbonate).

Not suitable for PE, PTFE and silicon. Bondings are well resistant to water, gasoline and oils.

35-44

General purpose, tough and flexible, high peel resistant
Technical Data Sheet
General purpose, tough and flexible, high peel resistant

Multipurpose, transparent colourless structural adhesive.

It provides a flexible film with good adhesion and peeling strength on metal substrates.
It is recommended for structural bonding of many materials: metals, ferrite, ceramic, marble, glass, concrete, wood and some plastics (polyester, ABS, rigid PVC).

Not suitable for soft materials, PE, PP and PTFE. Bondings are well resistant to water, gasoline and oils.

36-10

Flexible and tough, 120 minutes
Technical Data Sheet
Flexible and tough, 120 minutes

Multipurpose highly-toughened structural adhesive.

Recommended for structural bonding of many materials: metals, ferrite, ceramic, marble, glass, concrete, wood and some plastics (polyester, ABS, rigid PVC).

Not indicated for rubber, soft materials, PE, PP and PTFE. Bondings are well resistant to water, gasoline and oils.

3636

Tough, non-sag, high performance
Technical Data Sheet
Tough, non-sag, high performance

Thixotropic two-components adhesive based on epoxy resin, which cures at cold or sparing temperatures.

It’s specific for bonding of metals, ceramics, woods, foamed materials, many plastics and composites.

It provides strong adhesion and high resistance to impact, shocks and vibration. It allows large-size pieces positioning.

4401

Tough, high temperature
Technical Data Sheet
Tough, high temperature

Loxeal 4401 is a toughened, semi-flexible, high-temperature resistant, two-part epoxy resin, which provides good adhesion on a variety of substrates as wood, metal, ceramics and many types of plastics and composites.

Mixing ratio 2:1 by volume. It provides a strong adhesion with high peel, cut and shear strength up to +120°C temperature with peaks at +140°C.

Excellent resistance at high temperature for short periods, as i.e. in stove enamelling cycles.

4428

Fast curing, high temperature, for composits
Technical Data Sheet
Fast curing, high temperature, for composits

Loxeal 4428 is a thixotropic, two-components epoxy resin.

Especially developed for composites bonding, it provides excellent impact and vibration as well as high temperature resistance.

It’s ease of mixing and applications allows its use on gap filling.

4429

High viscosity, non-sag, slow curing, high temperature, for carbon fibre
Technical Data Sheet
High viscosity, non-sag, slow curing, high temperature, for carbon fibre

Loxeal 4429 is a toughened, semi-flexible, high-temperature resistant two-component epoxy resin.

Especially developed for composites bonding, it provides good adhesion on various substrates as wood, metal, ceramics and many types of plastics.

Designed to be nonsag for ease of use on vertical surfaces and in wide gaps. Mixing ratio 2:1 by volume.

It provides a strong adhesion with high peel, cut and shear strength up to +120°C temperature with peaks at +140°C.

Two Part Modified Epoxy Adhesives

This Two Components Adhesives are based on a modified epoxy resin. They’re designed for applications that require flexible bonding and sealing.

Key benefits

  • Ideal for potting and paintable
  • NCO free
  • Flexible and elastic
  • Good compressive strength
  • They can resist to high temperature, be self-extinguishing and thermally conductive.

Substrates

Plastic:

  • PC
  • PA
  • PI
  • PMMA
  • ABS
  • Metal
  • Ceramic
  • Composite

4807

Maximum flexibility, for bonding together different materials
Technical Data Sheet
Maximum flexibility, for bonding together different materials

Loxeal 4807 is a two-components adhesive based on modified epoxy resin for flexible bonding and sealing applications.

It fully adheres to plastics like PA, ABS, PC, PET, PMMA, PI, metals ceramics and composites. After full curing the adhesive looks soft and flexible.

It provides high temperature resistance up to +120° with peaks to +150°C. Suitable for bonding and sealing glass fiber, metal frames in white appliances production (dishwashers, washing machine), and in automotive (lighting).

4820

Self-levelling, maximum flexibility, general purpose
Technical Data Sheet
Self-levelling, maximum flexibility, general purpose

Self-levelling two-part adhesive based on modified epoxy resin for flexible bonding and sealing applications.

It fully adheres to plastics like PA, ABS, PC, PET, PMMA, PI, metals, ceramics and composites.

Temperature resistance up to +120°C with peaks to +150°C.

4821

High viscosity, maximum flexibility, general purpose
Technical Data Sheet
High viscosity, maximum flexibility, general purpose

Two-part adhesive based on modified epoxy resin for flexible bonding and sealing applications.

It fully adheres to plastics like PA, ABS, PC, PET, PMMA, PI, metals, ceramics and composites. Initial fast setting.

After full curing the adhesive looks tough and flexible and provides high peel resistance. Temperature resistance up to +120°C with peaks to +150°C.

4826

Self-extinguishing, thermal conductive, high temperature
Technical Data Sheet
Self-extinguishing, thermal conductive, high temperature

Two-part adhesive based on modified epoxy resin for flexible bonding and sealing applications.

Specifically designed when self-extinguishing and thermal conductivity properties are required, it fully adheres to plastics like PA, ABS, PC, PET, PMMA, PI, metals, ceramics and composites.

After full curing the adhesive looks tough and flexible and provides high peeling strength and temperature resistance up to +120°C with peaks to +150°C.

Call us today at +44 (0)191 272 2982
or email us at sales@advancedadhesives.co.uk

We’ve glued everything from rubber ducks to luxury cars,
there’s not much we haven’t stuck together and we’ll have the adhesive solution for you

Menu