Threadlocking Anaerobic Adhesives

  1. Home
  2. Products
  3. Threadlocking Anaerobic Adhesives

Loxeal anaerobic threadlocking enable you to lock bolts, studs nuts and screws and to avoid loosening caused by stress and vibration. They grant high resistance to external agents

Key benefits

  • Replace mechanical washers and fasteners
  • Prevent loosening caused by vibration, mechanical and thermal shock.
  • Lubricate for easier assembly
  • Maintain the initial applied torque
  • Available in 3 grades of locking strength: low strength (easy to dismantle), medium strength (possible to dismantle), high strength (permanent locking)
  • Certified according to international standards DVGW, TZW

Substrates

  • Metal

24-18

Anti-vibration, general purpose
Technical Data Sheet
Anti-vibration, general purpose

Low strength anaerobic adhesive for thread locking of nuts, bolts and screws of all types that require to be easily desmantled. Highly resistant to heat, corrosion, vibrations, water, gases, oils, hydrocarand many chemicals.

54-03

Fluid, general purpose
Technical Data Sheet
Fluid, general purpose

Medium strength anaerobic adhesive for thread locking of nuts and bolts of all types requiring to be dismantled. Highly resistant to heat, corrosion, vibrations, water, gases, oils, hydrocar¬bons and many chemicals.

55-03

High temperature, or oily surfaces, approved for gas, potable water
Technical Data Sheet
Approvals
High temperature, or oily surfaces, approved for gas, potable water

Medium strength anaerobic adhesive for thread locking of nuts and bolts of all types that require to be dismantled. Suitable to be used on oily surfaces. Highly resistant to heat, corrosion, vibrations, water, gas, oils, hydrocarand many chemicals. Proven unscrewing resistance at +200°C.

Approved as gas-tight sealant for threaded fittings according to the European norm EN 751-1 (DVGW nr. NG-5146AU0399 and GAZ DE FRANCE).

Approved for potable water (TZW – DVGW). It keeps sealing properties unchanged between -55°C/+200°C and up to +250°C for short times.

Approvals

Download the Approval Certificates:

55-02

Green, no risk phases, blank MSDS
Technical Data Sheet
Green, no risk phases, blank MSDS

Medium strength anaerobic adhesive for thread locking of nuts and bolts of all types that require to be dismantled.

Highly resistant to heat, corrosion, vibrations, water, gas, oils, hydrocar­bons and many chemicals.

Designed to improve the operating conditions, they are not labelled as hazardous products, according to actual directive on dangerous products, it is labeled as not hazardous.

55-04

Fill large gaps, for large diameter studs
Technical Data Sheet
Fill large gaps, for large diameter studs

Medium viscosity anaerobic adhesive for thread locking of large diameter studs, nuts and bolts of all types that require to be dismantled. Highly resistant to heat, corrosion, vibrations, water, gases, oils, hydrocarand many chemicals.

70-14

Capillary penetration on pre-assembled parts, fast curing
Technical Data Sheet
Capillary penetration on pre-assembled parts, fast curing

Low viscosity and high capillary action for locking and sealing threaded fasteners and close fittings parts after assembly, also to penetrate and seal metal porosity in moulds and in castings. Medium to high strength locking. Highly resistant to heat, corrosion, vibrations, water, gases, oils, hydrocarbons, and many chemicals.

83-52

Green, no risk phrases, blank MSDS
Technical Data Sheet
Green, no risk phrases, blank MSDS

High strength anaerobic adhesive for locking and sealing of studs, nuts, bolts and threaded fasteners not requiring dismantling.

Highly resistant to heat, corrosion, vibrations, water, gases, oils, hydrocar­bons, and many chemicals.

Designed to improve the operating conditions, they are not labelled as hazardous products, according to actual directive on dangerous products, it is labeled as not hazardous.

83-54

General purpose, high temperature
Technical Data Sheet
General purpose, high temperature

High strength anaerobic adhesive for locking and sealing of studs, nuts, bolts and threaded fasteners not requiring dismantling. It can be used on all metals, either in free or forced matings. It provides temperature resistance up to +200°C and high unscrewing strength. Highly resistant to heat, corrosion, vibrations, water, gases, oils, hydrocarand many chemicals.

83-55

Sealant/retainer, for oily surfaces
Technical Data Sheet
Sealant/retainer, for oily surfaces

High strength anaerobic adhesive for locking and sealing of studs, nuts, bolts and threaded fasteners not requiring dismantling. It can be used on all metals either on free or forced matings. It provides high resistance to heat, corrosion, vibrations, water, gases, oils, hydrocarand many chemicals..

85-56

General purpose, medium viscosity
Technical Data Sheet
General purpose, medium viscosity

High strength, fast curing anaerobic adhesive for locking and sealing fitted parts.

High viscosity and thixotropic effect allow larger tolerances.

Highly resistant to heat, corrosion, vibrations, water, gases, oils, hydrocarbons, and many chemicals.

86-54

High viscosity, fast curing, fill large gaps
Technical Data Sheet
High viscosity, fast curing, fill large gaps

High strength anaerobic adhesive for locking and sealing thread connections.

High viscosity and thixotropic effect allow larger tolerances.

Highly resistant to heat, corrosion, vibrations, water, gases, oils, hydrocarbons, and many chemicals.

86-72

High temperature up to +230°C, approved for gas
Technical Data Sheet
Approvals
High temperature up to +230°C, approved for gas

Very high temperature (+230° C) resistant, high strength anaerobic adhesive for locking and sealing thread connections and fitted parts.

High viscosity and thixotropic effect allow larger tolerances.

Highly resistant to corrosion, vibrations, water, gases, oils, hydrocarand many chemicals.

DIN DVGW approved thread sealant for gas (according to DIN EN 751-1 Reg. Nr. NG – 5146AT0264).

Approvals

download the Approval Certificates:

Call us today at +44 (0)191 272 2982
or email us at sales@advancedadhesives.co.uk

We’ve glued everything from rubber ducks to luxury cars,
there’s not much we haven’t stuck together and we’ll have the adhesive solution for you

Menu