A good bonding starts from cleaning the parts carefully, in order to allow the adhesive to create chemical and physical conjunctions.
Loxeal Cleaners degrease and clean to prepare surfaces before adhesives application. They remove also oxidation caused by air and humidity.
Loxeal Removers are designed to remove cured adhesives (i.e. Cyanoacrylates and sealants)
Loxeal activators allow anaerobic and cyanoacrylate adhesives to cure when environmental and operative conditions are critical.
Loxeal Primers are designed to increase the surface energy, optimizing the bond strength to surfaces such as polypropylene, polyethylene, silicone and PTFE with cyanoacrylate adhesives

7

Primer for polyolefins
Technical Data Sheet
Primer for polyolefins

Solvent based treatment for bonding of polyolefin (polyethylene, polypropylene), thermoplastic rubbers, EPDM, PTFE, silicones and other difficult to bond materials.

Polyolefin Primer is recommended to be used with Loxeal 34 Instant Adhesive.

9

Activator
Technical Data Sheet
Activator

Cleans, degreases parts and speeds up the setting time of cyanoacrylate adhesives.

Curing effect is obtained in 1 – 4 seconds depending from type of adhesive, gap between parts and surfaces composition.

The Activator is applied on one surface and let to dry for a few seconds.

CR1

Remover for cured adhesives
Technical Data Sheet
Remover for cured adhesives

Loxeal CA Remover is a solvent blend to be used to remove cured cyanoacrylate adhesive from surfaces, clothing or to debond parts assembled with cyanoacrylate adhesives.

CR2

Remover for cured adhesives, non-flammable
Technical Data Sheet
Remover for cured adhesives, non-flammable

Loxeal CA Remover CR2 is a solvent-free non-flammable blend to be used to remove cured cyanoacrylate adhesive from surfaces, clothing or to debond parts assembled with cyanoacrylate adhesives.

Long lasting removing action due to effective dissolving over time.

Designed to improve operating conditions of operators, with particular care for their health and safety, CA Remover CR2 doesn’t report on label any risk phrase or symbol because it is not classified as dangerous, according to actual directive on dangerous products.

11

Activator
Technical Data Sheet
Activator

It cleans, degreases parts and speeds up anaerobic adhesives and sealants fixture time.

Curing effect is obtained in 20 – 120 seconds depending on type of adhesive, gap between parts and room temperature; wait for solvent evaporation before assembling parts.

It can be used either on flange or threaded joints; its use might reduce final mechanical strength.

The Activator is applied on one surface and let to dry for a few seconds.

18

Activator, non-flammable
Technical Data Sheet
Activator, non-flammable

Solvent free Activator to speed up the setting time of anaerobic adhesives and sealants.

Curing effect is obtained in 20 – 120 seconds depending from type of adhesive, gap between parts and room temperature.

Apply the Activator to one surface and the anaerobic Adhesive to the other one.

As it is solvent free there is no need to wait before assembling; it’s not harmful. It can be used either on flange or threaded joints; its use might cause a lowering of final mechanical strength.

20

Activator
Technical Data Sheet
Activator

To be used with acrylic adhesives and with anaerobics.

Apply the Adhesive on one part and the Activator on the other; assemble parts and wait few minutes to achieve fixing.

10

Cleaner, degreaser
Technical Data Sheet
Cleaner, degreaser

Non-CFC solvent based formulation for cleaning and degreasing of surfaces to be bonded or sealed with Loxeal adhesives or sealants.

Call us today at +44 (0)191 272 2982
or email us at sales@advancedadhesives.co.uk

We’ve glued everything from rubber ducks to luxury cars,
there’s not much we haven’t stuck together and we’ll have the adhesive solution for you

Menu